Standing-seam and panel metal roofs for porches, barns, outbuildings and rural homes around the Triad.
Fastest: call (833) 751-2102. Or send this and we call you back.
Metal roofing in the Winston-Salem area means standing-seam, exposed-fastener panel or metal shingle systems, most often on porches, barns, outbuildings and rural homes. Winston-Salem Roofing connects you with an independent local roofer who serves Forsyth County and nearby towns. The contractor inspects the building, explains the options and quotes the job.
Metal is the roof most people picture on a barn, and in the countryside around Winston-Salem it is also on porches, sheds, workshops and a good share of rural houses. In towns such as Walkertown, Rural Hall and Belews Creek, the lots are larger, the outbuildings are numerous and the roof is often a long, simple plane that suits a panel system well.
A metal roof is a different product from a shingle roof, not just a different color. Panels run from eave to ridge, the fasteners and seams are the weak points, and the way water moves off the surface is faster and louder. Choosing between standing-seam, exposed-fastener panels and metal shingles is the first decision, and the right one depends on the building and on what the roofer recommends after seeing it.
Winston-Salem Roofing is a call line, not a roofer. Tell the person who answers what you are roofing, a house, a porch or an outbuilding, and you are connected with an independent roofing contractor who serves your town. That contractor sets the price and does the work.
Do not walk on a metal roof when it is wet, frosted or sloped. Painted and coated panels can be very slick, and a fall from a barn roof is a serious one. If a panel has lifted in the wind, stay off it and call.
The roofer checks the pitch, the deck, the shape and the existing covering. A simple long plane suits panels well, while a roof with many valleys and dormers is harder to detail in metal.
Standing-seam, exposed-fastener panel and metal shingle have different seams, fasteners and appearance. The roofer explains how each would sit on your building, and where it is most likely to leak.
Metal roofs rely on trim at the eaves, the rakes and the ridge, and on flashing at pipes, chimneys and walls. These details decide whether the roof stays tight.
Panels are laid from one edge, secured and sealed at each seam. The roofer should walk you through the seam and fastener pattern, and tell you what to look at on the roof over the following seasons.
Re-roofing needs a building permit in Winston-Salem. Outside the city, which office issues it depends on the address, so check before the work starts, and ask the roofer who applies.
No sourced price for metal roofing in Winston-Salem was found, so none is printed here. These are the things that decide a metal roof quote.
| Job | Typical range | What it includes |
|---|---|---|
| System and material | Set by the product | Standing-seam, exposed-fastener and metal shingle are priced differently, as are steel and aluminum |
| Roof size, shape and number of penetrations | Quoted on site | Valleys, dormers and chimneys add trim and flashing work |
| Tear-off versus installation over the existing roof | Roofer's recommendation | Whether metal can go over an existing layer is a decision for the roofer and the permit office |
| Permit for re-roofing | Estimate, confirm locally | A permit-guide estimate for re-roofing in Winston-Salem is $90 to $360, about one week |
These are drivers, not quotes. Your exact price is confirmed on site by the contractor before any work starts. For published asphalt shingle estimates, which are not metal prices, see the asphalt shingle roofing page.
Metal roofing is most common on barns, outbuildings, porches and rural homes, in places such as Walkertown, Rural Hall, Germanton and Belews Creek. Long, simple roof planes and larger lots suit panels. Town houses with complex rooflines can use metal shingles, though the choice depends on the building.
Walkertown is a town in northeastern Forsyth County with 5,695 residents at the 2020 census, with Interstate 74 and NC 66 running through it and US 311 and US 158 tying it to Winston-Salem. Rural Hall, in northern Forsyth County, is a small, mostly low-rise town where roof jobs are usually single-family re-roofs and storm repairs. Both have the kind of detached houses and outbuildings where a panel roof is a reasonable option.
Belews Creek is a rural area in northeastern Forsyth County near Belews Lake, with larger lots and mostly detached houses. Germanton, a community of 790 residents on NC 8 and NC 65, is rural, and detached houses and farm outbuildings are the typical roof jobs. Wallburg has new houses next to small farms, so roofs of very different ages sit side by side. See the Walkertown and Rural Hall pages for more on each.
The towns differ in their paperwork as well as their roofs. Which building department issues a roof permit depends on whether the address is inside town limits or in the unincorporated county, and Germanton can fall under Stokes or Forsyth depending on the parcel. A roofer who works in your town will usually know the usual route, but the inspections office has the final word.
A metal roof sheds rain and debris quickly, but it is not immune. Severe thunderstorm warnings for Forsyth County have cited 60 to 70 mph gusts and quarter-size hail, and falling limbs can dent or tear panels. After a storm, a roofer checks trim, fasteners and seams as well as the panels.
Wind tends to find the edges and the ridge first, where trim is attached. A roofer examining a metal roof after a storm looks at those lines, at any panel that has lifted, and at the fasteners along the eaves. Hail can leave dents in thin panels, and whether a dent matters is a question for the roofer, not a promise from this page.
The sources used here give no hail frequency or design wind speed for Forsyth County, so this page makes no claim about how many storms a roof will see. The point is practical: trees fall on metal roofs as they fall on shingle ones, and a roofer should look at the structure under a damaged panel as well as the panel itself. The storm damage roof repair page covers what happens after a storm.
Rain on metal is louder than rain on shingle, and an uninsulated or poorly vented metal roof can drip condensation on humid mornings. Winston-Salem's July average high is 87 F and July is the muggiest month. Insulation, underlayment and attic ventilation shape how a metal roof behaves indoors.
Noise is the first question most owners ask, and the honest answer is that it depends on what is under the metal. A solid deck with underlayment and attic space beneath usually sounds different from an open barn roof. On an outbuilding with no ceiling, rain will be loud and you will hear it.
Condensation is the less obvious problem. Warm, moist air meets a cool metal surface and water forms underneath, which can look like a leak. The cure is usually airflow or insulation rather than sealant, and the attic ventilation page explains how a roofer reads the difference.
Panels with raised seams that lock together, with the fasteners hidden under the panel. It is a common choice for houses and porches where a clean appearance matters. The seams run vertically, so the long, simple slopes of a ranch house or barn suit it best.
Ribbed or corrugated panels screwed through the face, with washers sealing each screw. It is a familiar roof on barns, sheds and workshops. The screws are the weak points, so the roof needs a look over time as the washers age and the panels expand and contract.
Small interlocking pieces that imitate shingle, slate or tile. They suit a roof with many planes and valleys better than long panels do. A roofer can show you samples, and in a historic district the commission would need to see the actual product.
Metal roofing in this part of the Piedmont is a rural and outbuilding story first. The towns around Winston-Salem that fit it are the ones with larger lots, detached houses and farm buildings: Walkertown, Rural Hall, Germanton, Belews Creek and Wallburg. Inside the city, most roofs are asphalt shingle on mid-century and 1980s houses, and metal shows up more on porches, additions and accent roofs.
Weather here is humid and wet more than extreme. Monthly rain averages about 2.6 to 3.4 inches, the snowy period runs from about November 29 to March 16, and July is the hottest month. Metal sheds snow and rain quickly, which can suit a house under trees. Which building department issues a permit depends on whether the address is inside town limits or in the unincorporated county, so confirm with the local inspections office.
If it's an emergency, call now. For non-urgent metal roofing, send the form and we'll call you back.
Not sure if you're covered? Check your ZIP code.
A new roof on a Winston-Salem home: the permit step, published price estimates and what to ask an independent roofer before you agree.
Assessing and repairing wind, limb, hail and tree damage to Winston-Salem roofs after thunderstorms and winter storms.
A roofer looks at intake and exhaust, insulation and moisture sources so the attic can move heat and humidity out.
Panels are the usual choice for barns and sheds because the roofs are long and simple and the building is often open underneath. Whether metal is better for a house depends on its shape, its use and your priorities. A roofer can explain what each option would mean for your building.
Sometimes, and sometimes not. It depends on the condition of the deck, the number of existing layers and what the roofer and the permit office accept. The sources used here do not give a North Carolina rule, so ask the roofer and the permit office rather than assuming either answer.
The sources used here do not address this, so this page makes no claim. A roofer or an electrician can answer questions about lightning protection for a particular building. Ask them directly when you discuss the roof.
Each screw passes through the panel and seals with a washer. Over time the washers age, the panels move with temperature and the screws can back out. A roofer re-seats or replaces them. Standing-seam systems hide their fasteners, which changes where leaks tend to appear.
Re-roofing needs a building permit in Winston-Salem, and which office issues one outside the city depends on whether the address is within town limits or in the unincorporated county. Check with the local inspections office before work starts, and ask your roofer who applies for it.
It depends on what worries you. Panels shed leaves and light debris quickly, and a roofer can detail the edges so limbs do less harm. A heavy limb can still dent or tear a panel. Ask the contractor what damage from your own trees would look like on each system.